Tally Dascom DL-830 - 1.8.2 Major Setup Menus; 1.8.3 Setup Steps Example

Tally Dascom DL-830 User Guide V1.0
14
1.8.2 Four major setup menus
Machine Information
System Setup
Net Config
Test Mode
1.8.3 Sample for setup steps
Below describes how to change the Print Density setting from 8 to 9 by panel operation.
1. The printer originally works in Normal mode with the follow display.
2. Press
∷
button once to enter Setup mode. Press ■ button once to scroll forward getting
the System Setup menu.
3. Press ►► button once to accept entering the System Setup menu. Keep pressing ■ button
to scroll to Print density sub-menu.
4. Press ►► button once to accept entering the Print density setting. Press ■ button once to
scroll the value from 8 to 9.
5. Press ►► button to accept saving the value of 9 for Print density.
6. Press ∷ button twice to terminate Setup mode and return to Normal mode.