Tally Dascom DL-830 - Page 72

Tally Dascom DL-830 User Guide V1.0
60

Enable the peeler in the setup menu
1. The printer originally works in Normal mode. Press
∷
button once to enter Setup mode. Press
■ button once to scroll forward getting the System Setup menu.
2. Press ►► button once to accept entering the System Setup menu. Keep pressing ■ button to
scroll to Peeler sub-menu. Press ►► button once to accept entering Peeler setting. Press ■
button once to scroll the value from Off to On.
3. Press ►► button to accept saving the value of On for Peeler. Press ∷ button twice to terminate
Setup mode and return to Normal mode.