Tally Dascom 1125 - Page Setup

Tally Dascom 1125
23
30. Roman8
31. Coax/Twinax
32. New-437
33. New-Dig 850
34. Old-Code 860
35. Flarro 863
36. 865 Hebrew
37 . CP 1257
38. 866 Ukraine
39. 866 Kazakhstan
40. Kamenicky
41. Mazovia
42. CP 775
43. CRO-ASCII
44. Arabic Farsi
45. Arabic Urdo
46. Greek DEC
47 . Greek ELOT 928
Character
Table
Graphic Table, Italic Table
Character table type
selection.
Page Setup
Page Setup Valid Settings Function
Line Per Inch
1, 2, 3, 4, 5, 6, 7 , 8
Sets the line spacing
Fanfold Form Length
3",3.5",11/3", 4", 5", 5.5" 6",7",8",
8.5",11", 70/6", 12", 14", 17"
Sets the page length for tractor mode
Fanfold Top Margin
0/60" … 10/60"…99/60"
Sets the top margin for tractor mode. Due to
mechanical tolerance, 0/60” is not guaranteed.
Fanfold Bottom
Margin
0/60"…10/60"...30/60"
Sets the bottom margin for tractor mode. Due
to mechanical tolerance, 0/60” is not
guaranteed.
Single Form Length
3", 3.5", 11/3", 4", 5", 5.5", 6", 7",
8", 8.5", 11", 70/6", 12", 14", 17"
Sets the page length for friction mode
Single Top Margin
0/60" … 10/60"…99/60"
Sets the top margin for friction mode. Due to
mechanical tolerance, 0/60” is not guaranteed.
Single Bottom
Margin
0/60"…10/60"...30/60"
Sets the bottom margin for friction mode. Due
to mechanical tolerance, 0/60” is not
guaranteed.
Roll Paper
Yes, No
In friction mode, [LF/FF] will not eject the paper
and feed to next page. (Assume roll paper)
Perforation Skip
Yes, No
Skips printing on perforation area