13
●
[
Stop Recording
]
button
Clicking this button will stop a recording session already in progress.
●
[
Receive Settings
]
button
Clicking this will allow you to view recording conditions settings and recording
status information from the data logger.
●
Recording Mode
<
Selections
:
One-time
/
Endless
>
One-time
:
When the possible number of recorded data readings
(
8000
readings per channel
)
is reached, recording stops.
Endless
:
When the possible number of recorded data readings is
reached, the oldest data is overwritten and recording continues.
●
Device Name
/
Channel Name
Make settings for each data logger concerning the device names and
channel names.
Device Name
:
Up to 16 characters
Channel Name
:
Up to 8 characters
４.After having completed the recording conditions settings, transmit the
settings to the data logger by clicking the [Start Recording] button.
５.After the transmission has been completed, a message will appear;
click the [OK] button to activate the settings.
To Next Page
Loading...
