Q
:
The computer won’t communicate via the Serial Port. What
should I do?
A:Try two or three times to nd the port connection by using the Auto-
detect function.
A:Check to make sure that the power of the main unit is ON.
A:Check to make sure that the connection is proper. Communication will
take place only through the serial port (RS-232C) and will not work
through the printer port or any other port.
A:Check to make sure that you can control the Thermo Recorder via the
software.
A:If you have access to another computer, try seeing if communication
works with the other computer.
A:If you have a computer with energy saving function settings, make sure
that the serial port has not been turned off. Especially on NEC brand
PC98 notebook computers the default setting maybe such.
A:Check to make sure that the serial port has not been rendered unusable
by the BIOS setting.
A: Make sure that the serial port setting has not been made to render
the port unusable. With some computers, especially all-in-one
computers the serial port serves as the modem jack.
【
How to check
】
①
View in the Device Manager Window.
For Windows XP or 2000
1. On the Desktop, right click on [My Computer] and click on
[Properties].
2. In the System Properties Window, click on the [Hardware] Tab,
then click on the [Device Manager] button to view the Device
Manager Window.
41
Troubleshooting
To Next Page
Loading...
