36
Operation with HDD, DVD and Video CD (Continued)
General Features (Continued)
Slow Motion
1 Press PAUSE/STEP (X) during playback.
The recorder will now go into PAUSE mode.
2 Press SCAN (m or M) during PAUSE mode.
The recorder will enter SLOW mode.
3 Use the SCAN (m or M) to select the required
speed: t 1/16, t 1/8, t 1/4, or t 1/2 (backward),
or T 1/16, T 1/8, T 1/4, or T 1/2 (forward).
With a Video CD, the Slow speed changes: T 1/16,
T 1/8, T 1/4 or T 1/2 (forward).
4 To exit Slow Motion mode, press N (PLAY).
ote
Slow motion playback in reverse is not possible with
Video CDs.
Random
1 Press RANDOM during playback.
The unit automatically begins Random Playback and
“RANDOM” appears on the TV screen.
2 To return to normal playback, press RANDOM until
“NORMAL” appears on the TV screen.
ip
By pressing SKIP > during Random playback, the
unit selects another title (track) and resumes Random
playback.
ote
This function only works with DVD Karaoke discs or
video CDs without PBC.
On a Video CD with PBC, you must set PBC to OFF
in the Setup menu to use the Random function. See
page 24.
Repeat
HDD - Repeat Title/Off
Press REPEAT to select a desired repeat mode.
• TITLE: repeats the current title .
• OFF: does not play repeatedly.
DVD Discs - Repeat Chapter/Title/All/Off
Press REPEAT to select a desired repeat mode.
• CHAPTER: repeats the current chapter.
• TITLE: repeats the current title .
• ALL: repeats the all titles on the disc.
(VR mode DVD-RW disc only)
• OFF: does not play repeatedly.
Video CDs - Repeat Track/All/Off
Press REPEAT to select a desired repeat mode.
• TRACK: repeats the current track.
• ALL: repeats the all tracks on the disc.
• OFF: does not play repeatedly.
ote
On a Video CD with PBC, you must set PBC to OFF in the
Setup menu to use the Repeat function. See page 24.
Repeat A-B
To repeat a sequence in a title:
1 Press A-B at your chosen starting point.
Repeat icon and ‘A-’ appears on the TV screen.
2 Press A-B again at your chosen end point.
Repeat icon and ‘A-B’
appears on the TV screen, and the
repeat sequence begins.
3 To cancel the sequence, press A-B repeatedly to
select OFF.
Time Search
The Time Search function allows you to start playing at
any chosen time on the disc.
1 Press DISPLAY twice during playback. The on-screen
display appears on the TV screen.
The Time Search box shows the elapsed playing time of the
current disc.
2 Within 5 seconds, use v / V to select the Time
Search icon in the on-screen display.
The “0:00:00” appears in the Time Search box.
3 Within 5 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and sec-
onds from left to right in the box.
You can not enter an invalid time.
If you enter the wrong numbers, press b
/
B to move the
under bar (_) to the wrong number. Then enter the correct
numbers.
4 Within 5 seconds, press ENTER to confirm the start
time.
Playback starts from the selected time on the disc.
To Next Page
Loading...
