Tascam CD-BT2 - Screen Display: Settings and Navigation; Other Screen Displays; General Settings Adjustment; Setting Item Value Adjustment

IMPORTANT SAFETY INSTRUCTIONS
23 TASCAM CD-BT2
Screen appearance and operation
Other screens
Shared features
The screen name, power status, CD player operation status,
track number and CD playback time are shown on every
screen.
The EFFECTOR, LEVEL and TUNER screens appear as
follows. All other screens appear the same as the TIME
DISPLAY screen. (See the “TIME DISPLAY screen”
on page 21.)
Screen
name
Powe
r
status
Track number, time, play status
Display of playback functions (VSA, TMP, KEY, BEE)
The status of every playback function is shown at the top of
the TEMPO screen, KEY & PITCH screen, B.E.E screen,
and SETUP & MISC. screen in the same way as on the TIME
DISPLAY screen.
Settings
Every screen other than the TIME DISPLAY screen has
settings. See “Making settings” on page 23 for details.
Making settings
Settings and selections can be made as necessary on every
screen except the TIME DISPLAY screen. Use the CURSOR
and VALUE keys as necessary to make settings and selections.
Selecting items for setting
Use the CURSOR (§, ¶) keys.
The value of the selected item is shown in highlighted in
inverse.
On the EFFECTOR and LEVEL screens, some items are
selected by the CURSOR (˙, ¥) keys.
NOTE
When there are other items above or below the items
currently onscreen § or ¶ appears on the right side of
the screen.
Setting item values
Use the VALUE (+, –) keys. The selected values (settings) take
effect immediately. (Conrmation is not necessary.)