30 TASCAM CD-BT2
IMPORTANT SAFETY PRECAUTIONS
Using a bass with the trainer
By connecting a bass to this player, you can mix the input
from the bass with the CD playback sound. You can also use
the built-in bass effects for bass practice.
Adjusting the input level
Use the INPUT volume control next to the BASS IN jack to
adjust the input level.
Use the LEVEL screen to adjust the signal level after the
sound has been processed by the bass effects.
Adjusting the monitoring volume
Use the PHONES VOLUME (+, –) keys to adjust the head-
phones output volume. Follow the same procedure used when
adjusting the playback volume of a CD. (See “Adjusting the
volume” on page 25.)
When monitoring through the LINE OUT jack using an
audio system or speakers with built-in amplifiers, adjust
the volume on the external device. You cannot adjust the
output level of this device’s LINE OUT jack.
Playing along with a CD
This device combines the signal input through the BASS
IN jack and the CD playback signal and outputs this mix to
the PHONES and LINE OUT jacks. In other words, you can
connect your bass to the player and hear yourself play along
with a CD through the outputs.
Use the following procedures to adjust the CD playback signal
and input signal levels independently to achieve the mix
balance that you desire.
1 Press the LEVEL key to open the LEVEL screen.
The BASS and CD knob icons appear. These adjust the levels
of the input signal from the BASS IN jack and the CD playback
signal.
2 Use the CURSOR (˙, ¥) keys to select the knob that
you want to adjust. The level value of the selected knob
appears highlighted in a pop-up. (See the following
page.)
To Next Page
Loading...
