Tascam CD-BT2 - Listening to CDs: Pitch Adjustment; Pitch Adjustment with Tempo (VSA); Independent Pitch Control

26 TASCAM CD-BT2
IMPORTANT SAFETY PRECAUTIONS
Listening to CDs
Changing the pitch with the tempo
When the Variable Speed Audition (VSA) function is ON,
the playback pitch of a track does not change when the tempo
is changed. If you want the pitch rise and fall as the tempo is
increased and decreased like conventional tempo control, turn
the VSA function OFF. (The default setting for VSA is ON.)
1 Press the TEMPO key to open the TEMPO CHANGE
screen.
2 Use the CURSOR ¶ key to select the FIX PITCH
item, and the VALUE (–) key to select VSA OFF.
When the VSA function is OFF, the icon at the top of the
screen appears normally.
Changing only the pitch
You can change the pitch without changing the tempo.
1 Press the KEY key to open the KEY & PITCH screen.
2 With the KEY item selected, use the VALUE (+, –) keys
to adjust the pitch up or down in semitones.
The KEY item allows the pitch to be raised or lowered 1 to 6
semitones (â6 – ã6). Any setting other than 0 changes the
playback pitch and the display icon appears in inverse.
3 Use the CURSOR ¶ key to select the FINE PITCH
item and the VALUE (+, –) keys to make minute adjust-
ments to the pitch in cents (1/100 semitone).
NOTE
Select the KEY or FINE PITCH item and press both
VALUE (+, –) keys simultaneously to reset the adjustment
of that setting to 0.
Even if the KEY item setting is “0”, the icon at the
top of the screen appears in inverse if FINE PITCH is
adjusted.