Tascam CD-BT2 - Effect Module Parameters (Part 2); Octaver (OCT) Module; Techno Filter (TEC) Module; Reverb (REV) Module

IMPORTANT SAFETY INSTRUCTIONS
43 TASCAM CD-BT2
Module Effect Parameter Details Range
Octaver
(OCT)
Adds a sound one octave higher or lower to the original
sound, creating a thick sound.
OCT
Select the octave up or down DN/UP
Techno lter
(TEC)
Varies the value of the lter at random to create a
characteristic and unique sound.
SPEED
Adjusts the speed of modulation 0–20
MIX
Adjusts the amount of the effect 0–20
Reverb
(REV)
Creates reections to give the sound greater width.
TIME
Adjusts the reverberation time 0–25
MIX
Adjusts the amount of the effect 0–20
Delay
(DLY)
Adds echoes to the sound. Adjust the TIME and turn up
the MIX for a rockabilly sound.
TIME
Adjusts the delay time 0–99
MIX
Adjusts the amount of the effect 0–20
7-band EQ
(E.Q)
Boosts and cuts specic frequency bands. (Band values
given in Hz.)
50
120
400
800
Adjusts the amount of boost or cut
for the selected frequency band
±18
2k
4.5k
8k
Exciter
(EXC)
Adds harmonics to the original sound to make rich,
shimmering tones that stand out.
FREQ
Adjusts the harmonics added to the
sound
0-30
MIX
Adjusts the amount of the effect 0-20
Effect module parameter list