GTS Technical Manual
19. April 2010 Edition: V1.00/2010 5-34
Copyright © 2010, Diversey Inc.
05.0 swingo 1255 B Power - mechanics.fm
the pulley.
• Complete assembling according to chapter REPLACING OF
BRUSH BELT.
• Complete assembling according to chapter REPLACING OF
BRUSH DRIVE UNIT.
Remarks
If you have to remove the complete pulley and axle together then
you can remove the three screws (07/122) with an Allan key by
positioning the slots of the pulley (07/124) right over the screws.
To Next Page
Loading...
