Taski swingo 1255B

GTS Technical Manual
19. April 2010 Edition: V1.00/2010 5-37
Copyright © 2010, Diversey Inc.
05.0 swingo 1255 B Power - mechanics.fm
5.1.8.4 Replacing of intermediate pulley
Picture 41: Intermediate pulley
Remove
• Remove brush drive unit according to chapter REPLACING OF
BRUSH DRIVE UNIT.
• Remove brush belt according to chapter REPLACING OF
BRUSH BELT.
• Remove motor belt according to chapter REPLACING OF
MOTOR & MOTOR BELT.
• Remove the three screws (07/117) for the intermediate
pulley.
• Remove the complete intermediate pulley (07/113).
Mount
• Mount the new intermediate pulley.
• Position and tighten the screws.
• Complete assembling according to the chapter REPLACING OF
MOTOR & MOTOR BELT.
• Complete assembling according to the chapter REPLACING OF
BRUSH BELT.
• Complete assembling according to the chapter REPLACING OF
BRUSH DRIVE UNIT.