LOCK ING BAR
FOLD
HAND LE
001
TRAN SPORTATIO N
WHEE LS
RX7
54
4.2.2 Folding Up the Rowing Machine
⚠ WARNING
+ Do not connect the equipment to the power supply when it is folded up. Try not to operate
the equipment when it is folded up.
⚠ CAUTION
+ Do not lean on the equipment when it is folded and do not place anything on top of it that
may make the equipment unstable or fall down.
ATTENTION
+ Make sure that nothing is standing next to or on top of the rowing machine that can be
spilled or thrown or that makes it impossible to fold the rowing machine.
1. Grasp the handle (FOLD HANDLE) with the right hand and loosen the folding mechanism with
the left hand by pushing down the safety pin.
2. Lower carefully the rowing machine to the oor.
3. Now simply fold the rail upwards until you hear a click sound.
→ The folding mechanism is locked again now.
4.3 Transportation Wheels
The rowing machine is equipped with transport wheels and can be easily moved.
ATTENTION
If you want to transport your equipment over particularly sensitive and soft oor coverings,
such as parquet, planks or laminate, lay out the transport route with cardboard or similar to
avoid possible oor damage.
1. Stand behind the equipment and lift it until the weight is transferred to the transportation wheels.
After that, you easily can move the equipment to a new position. For long transport distances
the equipment should be disassembled and safely packed.
2. Select the new location by following the instructions in the section 1.4 of this manual.
To Next Page
Loading...