49
3.5.9 Troubleshooting manual
PROBLEM: The IR system only works with interferences.
SOLUTION
1. Clean the IR receiver on the computer with a little window cleaner.
2. Clean the IR transmitter on the handle with a little window cleaner.
3. Replace batteries. See point “Replace batteries”.
4. Program the IR/RMC code again. See point “Remote Control Code (RMC Code)”.
5. Ask for a service technician.
PROBLEM : The IR system does not work!
SOLUTION
1. Replace batteries. See point “Replace batteries”.
2. Program the IR/RMC code again. See point “Remote Control Code (RMC Code)”.
3. Ask for a service technician.