Taylor C712 Operator Training

C712 Operator Training -11-
Freezing Cylinder Reset
If the mix gets too cold, the reset button will trip to protect the beater motor. This could be caused
by insufficient mix in the freezing cylinder. If this occurs, inspect the pump to verify it is properly
assembled.
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________

Taylor C712 Specifications

General

Brand	Taylor
Model	C712
Category	Freezer
Language	English