Taylor C712 - Safety Precautions

C712 Operator Training -4-
Mix Out
The Cause
Solution
Open the hopper lid and fill the hopper
with new mix. The mix out indicator
light will turn off after the mix covers the
bottom sensor. The mix low indicator light
will turn off after the mix covers the top
sensor.
Note: There may be a beeping sound
when a mix light is lit.
When the machine experiences a mix out condition, the machine enters the STANDBY mode of
operation.
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________