Taylor C712 - Drip Pan

C712 Operator Training -24-
Drip Pan
Excessive mix leakage into the long drip pan.
Cause: The seal on the drive shaft is improperly lubricated or worn.
Remedy: Lubricate properly or replace the seal.
Cause: The drive shaft seal is installed inside-out.
Remedy: Install correctly.
Cause: Inadequate lubrication of the drive shaft.
Remedy: Lubricate properly.
Cause: The drive shaft and beater assembly work forward.
Remedy: Call an authorized service technician.
Cause: Worn rear shell bearing.
Remedy: Call an authorized service technician.
Cause: Gear box out of alignment.
Remedy: Call an authorized service technician.
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________