64
Figure-154
26. Scrub the upper and lower plate with the grill
cleaning tool and pad.
See Figure-155.
Figure-155
27. If needed, scrub the upper platen with the Kay
®
double-sided grill brush.
See Figure-156.
Figure-156
28. Remove and empty the grease cans and take them
to the three-compartment sink. Leave them at the
sink until the grill cleaning is finished. Continue
through the clean mode until the lower plate rises.
See Figure-157.
Figure-157
Note: Allowing the grill cleaner to sit on the grill surfaces
will require less effort and time to scrub heavy soil
buildup and achieve a clean grill.
29. To clean the lower plate sides, pull out the grill and
raise the lower plates.
See Figure-158.
Figure-158
30. Once the platen has raised, put the multi-use tool
pad on the flat paddle tool. Spray the multi-use tool
pad with grill cleaner.
See Figure-159.
Figure-159
31. Scrub the lower plate sides. Repeat until the sides
are fully covered.
See Figure-160.