63
Figure-150
19. Firmly attach the cleaning pad to the Kay
®
grill
cleaning pad holder.
NOTICE! DO NOT use metal scrapers,
abrasive pads, screens, or wire brushes. Damage to
components may result.
20. Apply the grill cleaner to the platen surfaces, starting
from the right platen to the left platen.
21. Using the Kay
®
grill cleaning pad holder, distribute
the grill cleaner around the upper platens to ensure
full coverage.
See Figure-151.
Figure-151
22. Remove the cap from the dosing bottle and squeeze
the bottle to fill the dosing cup as marked 1/2 oz.
See Figure-152.
Figure-152
23. Beginning on the left lower plate, pour the dosed
1/2 oz. of grill cleaner from left to right in the shape of
an arch pattern M. Repeat for each lower plate until
all of them are fully covered.
See Figure-153.
Figure-153
24. Apply the grill cleaner to the back side of the platens,
from the right platen to the left platen.
25. Spread the grill cleaner thoroughly on the lower
surface to ensure full coverage.
See Figure-154.