69
Figure-180
15. Scrape off as much carbon buildup as possible from
all surfaces of the upper platens (especially the back
and corners) with the scraper.
16. With all of the platens up, apply sufficient Kay
®
QSR
heat activated grill & toaster cleaner to the grill tool
pad and coat the edges of the upper platens with the
product. See
Figure-181.
Figure-181
Note: If needed, pull the grill out from the wall and stand
to the side of the grill to reach the back side of the upper
platens. Pour additional Kay
®
QSR heat activated grill &
toaster cleaner onto a grill cloth and apply it to hard
to-reach areas. See Figure-182.
Figure-182
17. Use a separate bottle of Kay
®
QSR heat-activated
grill & toaster cleaner and remove the cap. Evenly
pour the entire bottle of cleaner onto the lower plate
surface of the grill along with the remainder of the
first bottle.
See Figure-183.
Figure-183
Note: Make sure to coat the entire surface of the lower
plate. Use the Kay
®
grill cleaning pad holder with the pad
if needed to spread product for full coverage of the grill
surface. See
Figure-184.
Figure-184
To Next Page
Loading...
Need help?
General
