Teac AG-H600NT - Radio Features; FM;AM Tuning Methods

Listening to FM/AM
o Select FM or AM by pressing the SOURCE button
repeatedly. SOURCE
• You can also use the BAND button on the remote control unit.
EJ Select the desired tuning mode.
TUNING MODE
Each time the TUNING MODE button is pressed, the tuning mode
changes as follows:
Manual tune
FM
<
>
108.00MHz
Auto tune
~
FM
<A>
108.00MHz
Preset tune
~
FM
CH01 108.00MHz
76
D Select the station you want to listen to.
MULTI JOG/
ENTER
Manual tuning mode
Turn the MULTI JOG/ENTER knob (or press the TUNING/PRESET
ViA button on the remote control unit) until the station you
want to listen to is found.
The frequency changes by a fixed step
(FM: 50 kHz steps, AM: 9
kHz steps).
Auto tuning mode
Turn the MULTI JOG/ENTER knob (or press the TUNING/PRESET
ViA button on the remote control unit) to begin auto tuning.
When a station is found, the unit tunes in the station
automatically. Repeat this step until the station you want to
listen to is found.
• Press the TUNING MODE button to stop the auto tuning.
FMMode
Pressing the FM MODE button alternates between Stereo mode
and Mono mode.
o 0
000
~ ~ ~ FM MODE
~%
Stereo:
FM stereo broadcasts are received in stereo and the stereo
indicator
is displayed.
----~------,
FM oS
< > 108. 00MHz
Mono:
Select this mode when the signal is weak. Reception will be
forced monaural, reducing unwanted noise.