Teac LCDV3255HD - Advanced Picture Settings; Blue Color, Aspect Ratio, and Noise Reduction; Screen Settings and Adjustments

30
TV Function
Blue
Press the ▲▼ button to select Blue and press the ◄► or
ENTER button to enter the adjusting bar. Press the ◄►
button to select adjust the level.
Notes:
 The items Red, Green and Blue are only available when Color Temperature is set to User.
 Within the adjusting bar, you can select Red, Green and Blue by pressing the ▲▼ button.
Aspect Ratio
Press the ▲▼ button to select Aspect Ratio and press the ◄► button to select 16:9, 4:3, Auto, Zoom2
or Zoom1.
Noise Reduction
Press the ▲▼ button to select Noise Reduction and press the ◄► button to select Auto, Off, Low,
Standard or High.
Screen
This item is only available in VGA mode.
Press the ▲▼ button to select Screen and press the ►
or ENTER button to enter its sub menu, as shown on the
right:
Within this menu, press the ▲▼ button to select
desired item and press the MENU button to return.
Press the EXIT button to exit.
Auto Adjust
Press the ▲▼ button to select Auto Adjust and press the ► or ENTER button to start auto
adjusting the screen.
Horizontal Pos.
Press the ▲▼ button to select Horizontal Pos. and press the ◄► button to adjust the level.
Vertical Pos.
Press the ▲▼ button to select Vertical Pos. and press the ◄► button to adjust the level.
Size
Press the ▲▼ button to select Size and press the ◄► button to adjust the level.
Phase
Press the ▲▼ button to select Phase and press the ◄► button to adjust the level.