The main functions of the device like Auto Logout, Key buzzer; Language,
Keypad Type and Remote ID can be set under this menu. Boot Wizard,
Show Device ID when Preview, Show time when Preview and Auto Turn
Off Screen can also be Enabled/Disable.
Time Zone: Select your time zone for proper time view
Date format: Set the correct date format for your area
System Date: This will be set automatically from the recorder
System time: This will be set automatically from the recorder
Sync Time: The system time can be synchronized from the link set under
“Advanced” (the device must be connected to the Internet)
Time format: Select between 12h & 24h format.
OSD Alpha: The white balance can be set under this menu.
VGA resolution: The display resolution can be set her.
Auto Switch: Switch between x1 view & x4 view (2-10 seconds)
You can format the hard disc and set the value after which period of time
the oldest file shall be deleted.
Enable one or more of the following alarm you want to get a notification.
(when HDD`s are not found, Disc error, Insufficient Disc space, Network
disconnection, IP address conflict, Record error or all). Choose from the
three notification possibilities. Alarm: In the live view a red triangle with a
exclamation mark will be shown if one or more errors occur.
Buzzer: The device starts buzzing when one or more errors occur.
E-mail notice: The device sends out an email with the corresponding
message of the error.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
