To Next PageTo Next PageHow to register a new account on the Technaxx TX-29 Security System?
To register a new account, access the APP Security Premium and click on 'register'. Enter your desired username and password, then click 'Register' again. The APP will then prompt you for a valid email address to verify the account. This email address will receive an activation email from the cloud service.
What is the difference between login mode and Trial mode on Technaxx TX-29?
Besides the basic functions available in Trial mode, the login mode provides users with equipment state warnings, alarm notifications, news feeds, and other auxiliary functions.
General| LED type | IR |
|---|---|
| Rotating | - |
| Megapixel | 1 MP |
| Sensor type | CMOS |
| Heat function | No |
| Camera included | Yes |
| Camera interface | Wi-Fi/RJ-45 |
| Camera resolution | 1280 x 720 pixels |
| Number of cameras | 1 |
| Fixed focal length | 4 mm |
| Optical sensor size | 1/4 \ |
| Placement supported | Indoor |
| Camera shutter speed | 1/25 - 1/25000 s |
| Minimum illumination | 0.01 lx |
| Night vision distance | 15 m |
| Connectivity technology | Wired & Wireless |
| Surveillance camera form factor | Bullet |
| International Protection (IP) code | IP66 |
| Placement | Table, Wall |
| Display type | LCD |
| Display diagonal | 10.1 \ |
| HDD size | 2.5 \ |
| Video in | AV |
| HDD interface | Serial ATA |
| Channels quantity | - channels |
| Storage media type | HDD |
| USB 2.0 ports quantity | 2 |
| Maximum internal memory | 4000 GB |
| Supported network protocols | UPnP, SMTP (SSL), PPPoE, DHCP, DDNS |
| Supported video modes | 720p |
| Video compression formats | H.264 |
| Ethernet interface type | Fast Ethernet |
| Operating temperature (T-T) | -10 - 55 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Cables included | LAN (RJ-45) |
Weight and Dimensions| Camera depth | 150 mm |
|---|---|
| Camera width | 97 mm |
| Camera height | 87 mm |
| Camera weight | 550 g |
| Display depth | 250 mm |
| Display width | 36 mm |
| Display height | 166 mm |
| Display weight | 1000 g |
Step-by-step guide for the physical installation of TX-29 and TX-30 units.
Instructions for installing a hard disk drive for recording and data storage.
Procedure for integrating additional IP cameras into the existing TX-29 or TX-30 system.
Manages camera connections, status, and network settings within the system.
Core system configuration including time, language, and display settings.
Sets basic system parameters like logout, buzzer, language, and remote ID.
Manages hard disk formatting and data retention policies.
Sets up recording schedules based on time, motion detection, or sensor triggers.
Configures network parameters for device connectivity and remote access.
Sets up email notifications for alarm events detected by the system.
Configures wireless network parameters for camera connections.
Configures individual camera channel settings, including encoding and display.
Manages system version, HDD status, logs, and user accounts.
Enables viewing of recorded video footage from the system's storage.
Allows backing up recorded video data to an external storage device like a USB stick.
Accessing the system's web interface within the local area network for viewing and settings.
Accessing the system remotely via the internet using a web browser.
Using the dedicated mobile app for remote monitoring on smartphones and tablets.
