31
3 Wireless networking
DMS3-CTC-25-420 v1.0. Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
3.3.1 Configuring WPA(2)-PSK encryption
Procedure
Proceed as follows:
1 Browse to the DGA4130.
For more information, see “4.1.1 Accessing the DGA4130 web interface from your local network” on page 40.
2 Click Wireless. The Wireless page appears.
3 On the left menu, select the access point that you want to configure.
4 In the Security Mode list under Access Point, select one of the following modes:
WPA2-PSK
This mode provides the highest security. Choose this version if you are sure that all your wireless clients support
WPA2-PSK.
WPA-PSK + WPA2-PSK
Choose this option if not all of your wireless clients support WPA2-PSK, or if you are not sure. Wireless clients that
support WPA2-PSK will use WPA2-PSK, the others will use WPA-PSK.
5 In the Wireless Password box, type a the key of your choice. The key must consist of 8 to 63 alphanumeric characters.
6 Click Save.
7 Reconnect your wireless client(s) to your DGA4130 using the new security settings.
For more information, see “3.1 Connecting your wireless client via WPS” on page 26 or “3.2 How to manually connect a
wireless client” on page 29.
To Next Page
Loading...
Need help?
General
