29
3 Wireless networking
DMS3-CTC-25-420 v1.0. Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
3.2 How to manually connect a wireless client
Procedure
To connect a wireless client to the wireless network, configure that wireless client with the wireless settings (network name
and wireless key) of your access point.
If your DGA4130 is still using the default wireless settings, use the network name (SSID) and wireless key that is printed on
the label on your DGA4130 (or product ID card if included).
You can always find back the current wireless settings via the DGA4130 web interface. For more information, see
“Forgot your wireless key?” on page 83
To Next Page
Loading...
