28
3 Wireless networking
DMS3-CTC-25-420 v1.0. Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
Connect your wireless client using WPS PIN code entry on your DGA4130
Proceed as follows:
1 Locate and note the WPS PIN of your wireless client. For more information, consult the documentation of your wireless
client.
2 Browse to the DGA4130 web interface.
For more information, see “4.1.1 Accessing the DGA4130 web interface from your local network” on page 40.
3 Click Wireless. The Wireless page appears.
4 On the left menu, select the access point to which you want to connect the wireless client to.
5 In the WPS Device PIN code box under Access Point, type the PIN code of your wireless client and click Set PIN code.
In case of problems
If you are having trouble connecting your wireless client via WPS, see “Cannot connect via WPS” on page 83 for more
instructions.
To Next Page
Loading...
Need help?
General
