36
3 Wireless networking
DMS3-CTC-25-420 v1.0. Copyright © 2017 Technicolor. All rights reserved.
This document contains Technicolor proprietary and confidential information. Passing on and copying of this document, use, extraction and
communication of its contents, is not permitted without written authorization from Technicolor.
5 On the left menu, click the 5 GHz access point.
6 Move the 5 GHz Band Steering slider:
To the right to increase the threshold. The 5 GHz signal of the client must be stronger before the client is switched to
the 5 GHz frequency band.
To the left to decrease the threshold. The 5 GHz signal of the client must be less strong before the client is switched to
the 5 GHz frequency band.
7 Click Save.
To Next Page
Loading...
