Technics OTTAVA f SC-C70MK2 User Manual

42
Listening to a preset FM/AM
channel
1 Press [MENU].
2 Press [
], [ ] repeatedly to select
“Tuning Mode” and then press [OK].
3 Press [
], [ ] to select “Preset” and
then press [OK].
4 Press [
], [ ] or numeric buttons to
select the channel.
Manual tuning and presetting
1 Press [MENU].
2 Press [
], [ ] repeatedly to select
“Tuning Mode” and then press [OK].
3 Press [
], [ ] to select “Manual” and
then press [OK].
4 Press [
], [ ] to tune to the required
station.
To start automatic tuning, press and hold [ ] or
[ ] until the frequency starts scrolling. Tuning
stops when a station is found.
■
To preset the channel
While listening to the radio broadcast, press
[PGM].
Press [ ] or [ ] to select the channel and
then press [PGM].
For reducing noisy sound
1 While receiving FM broadcasts, press
[MENU].
2 Press [
], [ ] repeatedly to select “FM
Mode” and then press [OK].
3 Press [
], [ ] to select “Mono” and
then press [OK].
• Select “Auto(Stereo)” in step 3 to return to stereo
broadcasts.
• “Mono” is cancelled if the frequency is changed.

Technics OTTAVA f SC-C70MK2 Specifications

General

CD Player	Yes
Bluetooth	Yes
Bluetooth Version	4.2
Bluetooth Codec	SBC, AAC
Bluetooth Profiles	A2DP, AVRCP
USB Playback	Yes
Optical Input	Yes
Ethernet	Yes
Headphone Output	Yes
JENO Engine	Yes
LAPC (Load Adaptive Phase Calibration)	Yes
Impedance	6Ω
Power Supply	AC 220-240V, 50Hz/60Hz
Power Consumption	38W
Speaker Units	Tweeter: 2cm Dome Type x2, Woofer: 8cm Cone Type x2, Subwoofer: 12cm Cone Type x1
Wi-Fi	Yes
Streaming Services	Spotify, TIDAL, Deezer, Internet Radio
Multi-Room	Yes
Type	All-in-one stereo system