Technics OTTAVA f SC-C70MK2 User Manual

27
Connections
AC power supply cord
• Use only the supplied AC power supply
cord.
• Insert the plugs of the cables to be
connected all the way in.
• Do not bend cables at sharp angles.
AC power supply cord connection
Connect only after all other connections are
completed.
AC IN terminal
To a household AC outlet
AC power
supply cord
(supplied)
• Wireless LAN (Wi-Fi
®
) setting may start when this
unit is turned on. If you stop the Wi-Fi setting,
select “No” in “Wi-Fi Setup” screen. Select “Yes”
to keep the Wi-Fi setting. (⇒ 31)
Note
• This unit consumes a small amount of AC power
(⇒ 107) even when the unit is in standby mode.
Remove the plug from the main electrical outlet
if you will not be using the unit for an extended
period of time. Place the unit so the plug can be
easily removed.

Technics OTTAVA f SC-C70MK2 Specifications

General

CD Player	Yes
Bluetooth	Yes
Bluetooth Version	4.2
Bluetooth Codec	SBC, AAC
Bluetooth Profiles	A2DP, AVRCP
USB Playback	Yes
Optical Input	Yes
Ethernet	Yes
Headphone Output	Yes
JENO Engine	Yes
LAPC (Load Adaptive Phase Calibration)	Yes
Impedance	6Ω
Power Supply	AC 220-240V, 50Hz/60Hz
Power Consumption	38W
Speaker Units	Tweeter: 2cm Dome Type x2, Woofer: 8cm Cone Type x2, Subwoofer: 12cm Cone Type x1
Wi-Fi	Yes
Streaming Services	Spotify, TIDAL, Deezer, Internet Radio
Multi-Room	Yes
Type	All-in-one stereo system