Technics OTTAVA f SC-C70MK2

44
(Continued)
Note
• You can also enter pairing mode by pressing and
holding [ -PAIRING] when the input source is
“Bluetooth”.
• If prompted for the passkey, input “0000”.
• You can register up to 8 devices with this unit. If a
9th device is paired, the device that has not been
used the longest may be replaced.
• While “Standby Mode” is set to “On” (⇒ 85), this
unit automatically turns on when a Bluetooth
®
connection is established to this unit from a paired
Bluetooth
®
device.
■
Listening to music stored on a Bluetooth
®
device
1 Press [ -PAIRING].
• “Ready” or “Pairing” is indicated on the display.
2 Select “Technics-SC-C70MK2-
****
” from
the Bluetooth
®
device’s menu.
• The name of the connected device is indicated
on the display.
• If the device name is set on the “Google Home”
app, the set name is displayed.
3 Start playback on the Bluetooth
®
device.
Note
• This unit can only be connected to one device at a
time.
• When “Bluetooth” is selected as the input source,
this unit will automatically try and connect to the
last connected Bluetooth
®
device. (“Linking” is
displayed during this process.)
Bluetooth
®
transmission mode
1 Press [ -PAIRING].
• If a Bluetooth
®
device is already connected,
disconnect it.
2 Press [MENU].
3 Press [
], [ ] repeatedly to select “Link
Mode” and then press [OK].
4 Press [
], [ ] to select the mode and
then press [OK].
Mode1:
Emphasis on connectivity
Mode2:
Emphasis on sound quality (default)
Note
• Select “Mode1” if the sound is interrupted.