Technics OTTAVA f SC-C70MK2 User Manual

46
Operations
Using USB device
(Continued)
You can connect a USB device to the unit
and play back music stored on the USB
device.
• Refer to “USB” (⇒ 103) for information
about the USB device this unit can play
back.
USB device
1 Connect a USB device to the unit.
• USB device with a thickness of 8 mm (
5
/
16
”) or
less can be connected.
8 mm (
5
/
16
”) or less
• Depending on a thickness of USB device, you
may not connect USB device while LAN cable is
connected.
2 Press [>SELECT<] repeatedly to select
“USB”.
• The folder/content selection screen will be
displayed.
3 Press [ ], [ ] to select an item and then
press [OK].
• Repeat this step to make further selections.
• Press [RETURN] to return to the previous folder.

Technics OTTAVA f SC-C70MK2 Specifications

General

CD Player	Yes
Bluetooth	Yes
Bluetooth Version	4.2
Bluetooth Codec	SBC, AAC
Bluetooth Profiles	A2DP, AVRCP
USB Playback	Yes
Optical Input	Yes
Ethernet	Yes
Headphone Output	Yes
JENO Engine	Yes
LAPC (Load Adaptive Phase Calibration)	Yes
Impedance	6Ω
Power Supply	AC 220-240V, 50Hz/60Hz
Power Consumption	38W
Speaker Units	Tweeter: 2cm Dome Type x2, Woofer: 8cm Cone Type x2, Subwoofer: 12cm Cone Type x1
Wi-Fi	Yes
Streaming Services	Spotify, TIDAL, Deezer, Internet Radio
Multi-Room	Yes
Type	All-in-one stereo system