Technics OTTAVA f SC-C70MK2 User Manual

30
(Continued)
Wired LAN connection
Broadband router, etc.
LAN cable
(not supplied)
1 Disconnect the AC power supply cord.
2 Connect this unit to a broadband router,
etc. using a LAN cable.
3 Connect the AC power supply cord to
this unit, and press [
]. (⇒ 27)
• When the connection is established, “ ” is
displayed.
4 Press [>SELECT<] to select “Chromecast
built-in”.
5 Start the “Google Home” app and
follow the on-screen instructions to set
up a connection. (⇒ 32)
Note
• While the AC power supply cord is disconnected,
the LAN cable must be connected or
disconnected.
• Use category 7 or above straight LAN cables (STP)
when connecting to peripheral devices.
• Inserting any cable other than a LAN cable in the
LAN port can damage the unit.
• When a LAN cable is connected, the Wi-Fi function
may be disabled.

Technics OTTAVA f SC-C70MK2 Specifications

General

CD Player	Yes
Bluetooth	Yes
Bluetooth Version	4.2
Bluetooth Codec	SBC, AAC
Bluetooth Profiles	A2DP, AVRCP
USB Playback	Yes
Optical Input	Yes
Ethernet	Yes
Headphone Output	Yes
JENO Engine	Yes
LAPC (Load Adaptive Phase Calibration)	Yes
Impedance	6Ω
Power Supply	AC 220-240V, 50Hz/60Hz
Power Consumption	38W
Speaker Units	Tweeter: 2cm Dome Type x2, Woofer: 8cm Cone Type x2, Subwoofer: 12cm Cone Type x1
Wi-Fi	Yes
Streaming Services	Spotify, TIDAL, Deezer, Internet Radio
Multi-Room	Yes
Type	All-in-one stereo system