Technics SA-EX320 Operating Instructions

Basic operations
Before operation, set VOLUME to the “MIN” position.
Press POWER.
Press SPEAKERS and check the "SPEAK-
ERS” indication lights up.
If the button is pressed once more, the indicator will switch off
i and no sound will be heard from the speakers.
|
' Press to select the desired source, and start
the desired source.
| TAPE MONITOR VOLUME (Refer to the appropriate operating instructions for details.)
VCR: To watch video tapes (VCR)
TV/DVD/DSS: To watch TV, DVD or DSS
[ТАРЕ MONITOR |: To listen to cassette tapes (The tape
monitor indicator will appear.)
(See below.)
CD: To listen to compact discs
| TUNER: To listen to radio broadcasts
| PHONO: To listen to phono discs
| Note
| | To watch a video (or DVD) or the TV, set the TV to either the
| TV mode or VIDEO mode as indicated below.
яз З | • To enjoy videos (or DVD)
| Set it to VIDEO mode.
1 е То watch TV
Set it to TV mode.
i | Turn VOLUME to adjust the volume level.
теезетчеетее %%%4%%%%% ФтееоФоФоагаааеааевинетевч«евиевчтетееоттееооеееооееоезооФеааелага
Ве sure to reduce the volume level, and switch the power to the
! | | After listening is finished
| standby condition by pressing POWER.
When the tape monitor indicator із lit or flashing El
VOLUME
This indicates that the tape monitor function of this unit is ON.
To listen to sources other than a tape, be sure to press
Ç) |; [TAPE MONITOR | and check the indicator goes out.
TAPE MONITOR € 5 | |
[ТАРЕ MONITOR )
[us
4
һам fost ere б ты қта бл лы.

Technics SA-EX320 Specifications

General

Tuning Range	FM, MW
Total Harmonic Distortion	0.08%
Signal to Noise Ratio	80 dB (MM)
Speaker Load Impedance	8Ω to 16Ω
Input Sensitivity/Impedance	2.5mV/47kΩ (MM)
Speaker Impedance	6 Ω - 16 Ω