Technics SA-EX320 Operating Instructions

лл бе
Recording
оп
a
tape
deck
e
Before recording, prepare the tape deck for recording (recording
level adjustment, etc.).
See the tape deck's operating instructions for details.
. Making a recording |
Select the source to be recorded.
Any source can be selected except [TAPE MONITOR].
Begin recording on the tape deck.
TAFE
ONTO
|
Follow
your
tape
deck's
operating
instructions.
Begin the desired source to be recorded.
Follow your equipment's operating instructions.
To check the sound recorded while a recording is being
made E]
It is possible to check the sound being recorded if your tape deck is
a 3 head system.
pem
ПИ
Press
|
ТАРЕ
MONITOR
|
on
this
unit
and
set
the
monitor
but-
ton on the tape deck to "TAPE".
Operation mE
TAPE MONITOR
Press | TAPE MONITOR | once again to turn it off.
Recording on а VCR
Before recording, prepare the VCR for recording (recording level
adjustment, input selector setting, etc.).
See the VCR's operating instructions for details.
БЕН о
| Select the audio source to be recorded.
SEES
ie
buf
|
|
Press
either
TV/DVD/DSS,
CD,
TUNER
or
PHONO
to
select
ars 2 і the source you мапі to record from.
Recording from the tape deck is not possible.
Begin recording on the VCR.
Follow your VCR's operating instructions.
Begin the source to be recorded.
Follow your equipment's operating instructions.

Technics SA-EX320 Specifications

General

Tuning Range	FM, MW
Total Harmonic Distortion	0.08%
Signal to Noise Ratio	80 dB (MM)
Speaker Load Impedance	8Ω to 16Ω
Input Sensitivity/Impedance	2.5mV/47kΩ (MM)
Speaker Impedance	6 Ω - 16 Ω