Technics SA-EX320 Operating Instructions

.
Speaker
connections
|
2222.
22
Placement of speakers
As well as enjoying normal stereo reproduction with the left and
Center speaker Front speaker right front speakers, a center speaker and surround speakers can
(not included) (Right) also be connected to this unit in order to enjoy the sound perfor-
(not included) mance of Dolby Pro Logic Systems.
Front speaker
(Left)
(not included)
We recommend that surround speakers be placed on the side of or
slightly behind the listener, and about one meter higher than ear
level.
However the position should be adjusted to your personal prefer-
X Subwoofer ence, because the effect varies to some degree depending upon
(not included) the sources.
| % The subwoofer сап be placed in any position.
Surround speaker Surround speaker
(Left) (Right)
(not included) (not included)
Connecting speakers
Other connections are possible depending on the speaker system you
have.
For details, see the operating instructions that came with your speaker
System.
Speaker cable
(not included)
Front speakers
Right speaker Left speaker Speaker impedance: 8 Q
(not included) (not included)
Before use a

Technics SA-EX320 Specifications

General

Tuning Range	FM, MW
Total Harmonic Distortion	0.08%
Signal to Noise Ratio	80 dB (MM)
Speaker Load Impedance	8Ω to 16Ω
Input Sensitivity/Impedance	2.5mV/47kΩ (MM)
Speaker Impedance	6 Ω - 16 Ω