Technics SA-EX320 Operating Instructions

Operation EN
i OFF/ON
ПП PROLOGIC
^. Enjoying sound with DOLBY PRO LOGIC |
` - - revere --- See ұсы. «d
Enjoying SURROUND or 3 STEREO
Select and start the desired source.
Press ПП PRO LOGIC to turn on the Dolby
Pro Logic system and select the desired
mode.
When the button is pressed, the Dolby Pro Logic mode is dis-
played.
Pressing it again changes the Dolby Pro Logic mode.
When employing SURROUND, use software recorded in
Doiby Surround.
For your reference
You can set the Dolby Pro Logic mode for each source.
Each source will retain the selected mode.
To turn off the Dolby Pro Logic systems
Press OFF/ON.
Manufactured under license from Dolby Laboratories Licensing
Corporation.
DOLBY, the double-D symbol ПП and "PRO LOGIC” are trade-
marks of Dolby Laboratories Licensing Corporation.

Technics SA-EX320 Specifications

General

Tuning Range	FM, MW
Total Harmonic Distortion	0.08%
Signal to Noise Ratio	80 dB (MM)
Speaker Load Impedance	8Ω to 16Ω
Input Sensitivity/Impedance	2.5mV/47kΩ (MM)
Speaker Impedance	6 Ω - 16 Ω