Technics SA-EX320 Operating Instructions

To switch the remote
control transmitter to
cassette deck opera-
tion mode
Facing toward the cassette
deck
ШЕН Ве sure to press this button before operating
the cassette deck.
Only when using a double
cassette deck
To select the tape deck
(DECK 1/DECK 2)
Dey The remote control indicator of the cassette deck will change
each time the button is pressed.
о о
(Reverse) (Forward)
To start playback
While the tape is stopped
М4/4(4 bbibb
(>)
To fast-forward or
rewind the tape
CHSELECT = —O LE + TEST
epe
OFON DEO ООС
track by pressing these buttons while the tape is playing.
To stop playback
SL-PG440, SL-PD847, SL-PD947, SL-PS840, SL-PD667, SL-P9066, SL-PD867, SL-PD967, SL-PD1000,
SL-PD687, SL-PD688, SL-PD787, SL-PD788, SL-PD887, SL-PD888, SL-PD987, SL-PD988, SL-PD1010,
SL-MC50, SL-MC60, SL-MC300, SL-MC310, SL-MC400, SL-MC410, SL-MC700
Some of the above models are not sold in certain areas.
To operate a laser disc player
The below procedures are examples for when a laser disc player is connected to the "TV/DVD/DSS" terminals of the receiver.
Facing toward the TV Facing toward the Facing toward
laser disc player the receiver
Set the
TV/DVD POWER VDP POWER TV/VIDEO TV/DVD
Sales
CY
еее
е
П
Switch
ON
the
i
the
TV
to
CC
З
dis
Switch
ON
the
"VIDEO".
4 power for ТУ. power for laser А
КС c2 sc Facing toward the laser disc player
py € x
Play will begin.
In the play mode
To search for a position VDP 44744 оу»
quor СС»
ТУ/ОУО POWER
To switch OFF the power to the laser
disc player
With TPS-equipped cassette decks you can move to the beginning of a |-
Remote control operation uM

Technics SA-EX320 Specifications

General

Tuning Range	FM, MW
Total Harmonic Distortion	0.08%
Signal to Noise Ratio	80 dB (MM)
Speaker Load Impedance	8Ω to 16Ω
Input Sensitivity/Impedance	2.5mV/47kΩ (MM)
Speaker Impedance	6 Ω - 16 Ω