The following request appears.
> Use the up/down arrow keys to select Store (to save the recording to the storage
medium) or Discard (to not save the recording) and confirm with OK.
8.2.4 Ending recording automatically
Option 1
> Press the On/Standby button.
A request is now displayed asking what should happen to the recording in progress.
> Use the up/down arrow keys to highlight the item with the action you want.
> Confirm by pressing OK.
The receiver will record the channel until the specified time and then switch to standby.
> If the receiver is switched on before the end of the recording, a request appears asking
whether you want to start watching the recording in progress, continue watching it live
or finish recording.
> Use the up/down arrow keys to highlight the option you want and confirm with
OK.
By selecting Start watching recording from beginning the recording
continues in Timeshift mode.
Option 2
> Press the Record button; the following window appears.
36
To Next Page
Loading...
