3. Connect the RUN HIGH KIT cable
0WCU0931xx to the UNITY MINI display
board.
2.6 REASSEMBLING THE UNITY DISPLAY AND W0008011 GUARD
1. Position the UNITY display
R0007063 to the frame.
2. Snap in the display on the bay-
onet type frame on the right side
and rest the display on the left
side.
If necessary, loosen the two
central black screws located
at the top on the rear of the
display.
RUN PERSONAL-UPGRADE VISIOWEB-UNITY 2.0
Assembly instructions- Rev. 1.1
e-mail: support@technogym.com
Page 20
To Next Page
Loading...
