Technogym RUN PERSONAL - Page 31

3. Disconnect the additional power supply.
It’s also possible to remove the addition-
al power supply..
A
B
A: run low kit cable alewin 0WCU0932xx;
B: adapter cable for alemet 0WCU0799xx.
For ALEMET equipment, the run low kit
cable alewin and the adapter cable alemet
must be used. If the equipment is ALEWIN,
only the run low kit cable alewin is used.
Hereafter, as an example, It’s shown the cables connection in the ALEMET equipment.
4. Identify the cable that arrives from the dis-
play.
RUN PERSONAL-UPGRADE VISIOWEB-UNITY 2.0
Assembly instructions- Rev. 1.1
e-mail: support@technogym.com
Page 31