Tecnoware ERA PLUS 600 - Technical Characteristics

User’s manual 10 UPS ERA PLUS 600-750-900-1.100-1.500
8 Technical Characteristics
UPS ERA PLUS Model 600 750 900 1.100
1.500
Power
600 VA (420 W) 750 VA (525 W) 900 VA (630 W) 1100 VA (770 W) 1500 VA (1050 W)
Technology Line Interactive with Stabilizer
Nominal Input Voltage Single-phase 230 Vac
Input Voltage Range +20% / -25%
Input/Output Frequency 50/60 Hz (automatic selection)
Input Frequency Range +/- 5%
Nominal Output Voltage Single-phase 230 Vac
Output Voltage Regulation
(Normal mode)
Through AVR (Automatic Voltage Regulation)
Output Voltage Regulation
(Battery mode)
+/- 5%
Output Inverter Waveform Modified Sinewave
Accepted Overload < 130%
Certifications
CE
Standards: CEI EN 62040-1 (Low Voltage Directive) –
CEI EN 62040-2 (EMC Directive)
Battery Type Lead acid, sealed, free maintenance
Number of batteries 1
Nominal Battery Voltage 12 Vdc
Battery Specifications
12 Vdc – 4,5
Ah – 6 cells
12 Vdc – 5 Ah
– 6 cells
12 Vdc – 5 Ah
– 6 cells
12 Vdc – 7,2
Ah – 6 cells
12 Vdc – 9 Ah – 6 cells
Backup Time (typical) 10 min
Battery Charge Time (typical) 4 hours
Audible Noise (at 1 meter) < 40 dBA
Cooling Natural
Environmental Operative Specification
Temperature: 0-40 °C - Humidity 0-95% (without condensation)
Altitude: max 3.000 mt
Computer Interface - 1 USB port
UPS Management Software -
Software TecnoManager,
downloadable free of charge from
www.tecnoware.com
Output sockets 2 UPS Output sockets (Schuko/Italian type)
Dimension (W x H x D) 10,1 x 14,2 x 27,9 cm
Net Weight 3.5 Kg 3.6 Kg 3.7 Kg 4,5 Kg 5 Kg
Technical data may change without prior notice