Name: Tecsun PL-368
Brand: Tecsun
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Turning the device on/off: Quick press the [ POWER ] button.

Volume control: Rotate the [ VOLUME ] knob upwards or downwards to

select your desired volume level.

VF (View Frequency) and VM (View Memory)

VF: VF mode is used when searching for new radio signals. Press the

[ VF/VM ] button. When the frequency indicator flashes twice, the VF

mode is activated.

VM: VM mode is used for looking up stations that have been stored into

the memory. Press the [ VF/VM ] button. When the preset memory

location indicator on the display flashes three times, the VM mode is

activated.

Using the Radio's Antennas

FM / Shortwave (SW): When listening to FM or shortwave radio, extend

the antenna and adjust its length and direction in order to get the

optimum reception.

Medium Wave (MW) / Long Wave (LW):

This radio uses an internal ferrite bar antenna to receive medium wave

and long wave broadcasts, the quality of which can be enhanced by

changing the position and direction of the device. You may also choose

to connect the external MW/LW ferrite bar antenna to the

[ LW/MW ANTENNA ] socket (3.5mm). Once inserted, rotate the antenna

in order to get the optimum reception.

USING THE DEVICE

Questions and Answers:

Need help?

Do you have a question about the Tecsun PL-368 and is the answer not in the manual?

Tecsun PL-368 Specifications

General