Name: Tecsun PL-368
Brand: Tecsun
Rating: 4 (1 reviews)

To Next Page

To Previous Page

TUNING INTO STATIONS

Turn on the device, then quick press the [ FM/ST. ], [ MW/LW ], [ < ] or [ > ]

(for SW) button to select your desired frequency band. You can tune into

your favorite stations using any of the following tuning methods.

Manual Tuning

In VF mode, rotate the [ TUNING ] knob to search for your desired stations.

To change the tuning step, quick press [ STEP ], “ ” is displayed above

the frequency.

Tip: Review the “Specifications” section (page 28) for an overview of the

selectable tuning steps for each frequency band and mode (SSB/SYNC).

Auto Scan

In VF mode, press and hold the [ VF/VM ] button. The device will

automatically scan the entire frequency band for available stations. When

a station is found it will stay there for about 5 seconds before continuing

the search. To stop the auto scan feature, quick press any key.

Direct Keypad Entry

In VF mode, quick press the numeric keys [ 0 - 9 ] to directly enter a

frequency.

Tips:

For FM band, ignore the decimal point when inputting frequency

numbers. For example: enter 9, 7, 4 for FM 97.4 MHz.

If the entered frequency is not within the covering range, the error

“ ” symbol will be displayed.

Questions and Answers:

Need help?

Do you have a question about the Tecsun PL-368 and is the answer not in the manual?

Tecsun PL-368 Specifications

General