14
Deleting All Stored Stations
It is possible to delete all stations from the memory (including ETM)
simultaneously.
1) Turn the device off.
2) Press and hold the [ ] (DEL.) button untill “dEL” and “ALL” flash
on the display.
3) Quick press the [ POWER ] button to confirm and delete all stored
stations.
4) Once the display returns to showing the clock time all stored
frequencies have been deleted.
Note: If the [ POWER ] button is not pressed for confirmation within 3
seconds, the delete function is exited automatically.
ENHANCED TUNING MODE (ETM+): AN INTRODUCTION
ETM+ allows you to auto tune and store FM, LW, MW and SW stations
into the ETM memory. Unlike ATS (Auto Tuning Storage), scanned
stations will not be stored into the regular memory (VM). In this way, when
you are in a different city or country, you can use the ETM+ function to
auto search new stations without overwriting any previously stored
stations within the memory.
Unlike its predecessor ETM (Easy Tuning Mode), ETM+ can also be used
for listening to LW, MW and SW stations more conveniently. Because
signals in these frequency bands may only be available during a specific
time of day, you can use this feature to make time-specific ETM memories.
To Next Page
Loading...
Need help?
General
