10
SW / SSB Meter Band Selection
Quick press [ < ] or [ > ] to change SW or SSB meter bands:
SW meter bands: 120m / 90m / 75m / 60m / 49m / 41m / 31m / 25m /
22m / 19m / 16m / 15m / 13m / 11m
SSB meter bands: 160m / 80m / 60m / 40m / 30m / 24m / 20m / 17m /
15m / 12m / 10m
WORKING WITH STATION MEMORIES
This device can store 850 stations (presets) into memory: 100 each for
FM and LW, 150 for MW (AM), 300 for SW, and 100 each for SSB and
SYNC. You may choose any of the below methods to store stations.
Storing Stations Manually
1) In VF mode, press the [ FM/ST. ], [ MW/LW ], [ < ] or [ > ] button to
select the frequency band.
2) Tune into the new radio frequency to be stored.
3) Quick press the memory [ M ] button, “PRESET ” will flash in the top
right corner of the display to indicate the next available memory location.
If desired, select a different memory location by using the [ TUNING ]
knob or the numeric keys.
4) Quick press the [ M ] button again to confirm the location or wait for
about 2 seconds to automatically store the station into memory.
To Next Page
Loading...
