PL-390 19
FM ST. (FM STEREO)
While listening to FM stereo stations, press the [FM ST.]
button with “ ” appears in the display to activate the
“ STEREO ” listening. If the received FM broadcast signal is
too weak, it is recommendable to turn off the stereo
function by pressing the [FM ST.] button again with “ ”
disappears.
Note: The stereo function will not be activated if the FM
station is not stereo broadcasting.
Repeat pressing the [AM BW] button to select your desired
6, 4, 3, 2, 1 kHz bandwidth.
Wide band: It has better audio fidelity when receiving
strong signals or local stations.
Narrow band: It is suitable to receive weak & long distant
station as narrow band is able to limit the interference from
adjacent strong signal and reduce the background noise.
AM BW (BANDWIDTH)
To Next Page
Loading...
