Tecsun PL-390 - Delete Memory; Manual Single Memory Deletion; Semi-Auto Memory Deletion

PL-39012
DELETE MEMORY
METHOD 1: MANUAL DELETE SINGLE MEMORY
1. Press the [VM] button to
enter the memory mode.
2. Rotate the [TUNING] knob to
select the memory that you
want to delete.
3. Press & hold the [DELETE]
button with “ ” flashing;
then press the [DELETE]
button to remove the unwanted
memory address.
Note: If " " is flashing more than 3 seconds without
confirmation, it will exit the delete function automatically.
Delete a single station
flashing
SLEEP
Timer
METHOD 2: SEMI-AUTO DELETE MEMORY
Feature: using the Auto-Browse function of memory to
quickly delete unwanted station.
1. Press the [VM] button to enter
the memory mode.
2. Press & hold the [VM] button
with [PRESET] flashing to auto
scan from one memory to
another, staying on each station
memory for about 5 seconds.
3. Once previewing your unwanted
station, simply press the
[DELETE] button with “ ”
shows on display to delete the
station, then keep on browsing
other stations.
SLEEP
Timer
Delete memory