Specifications (MSO70000/C Series, DSA/DPO70000B/C Series, and DPO7000 Series)
Table 1-1: Channel input and vertical s pecifications, all MSO70000/C, DSA/DPO70000B/C, and DPO7000 Series
models (cont.
)
5GS/s
Enhanced bandwidth Without enhanced bandwidth
Step gain 0.5 GHz 0.5 GHz 0.025 GHz 0.02 GHz
500 mV 13.0 mV 15.1 mV 14.0 mV 13.2 m V
200 mV 5.35 mV 6.35 mV 5.7 mV 5.4 mV
100 mV 2.95 mV 3.4 mV 2.95 mV 2.75 mV
50 mV 1.35 mV 1.6 mV 1.45 mV 1.38 mV
20 mV 0.54 mV 0.645 mV 0.58 mV 0.55 mV
10 mV 0.3 mV 0.34 mV 0.3 mV 0.277 mV
5 mV 0.19 0.21 mV 0.165 mV 0.141 mV
2 mV 0.11 mV 0.13 mV 0.1 m V 0.062 m
V
1 mV 0.09 mV 0.096 mV 0.097 mV 0.04 mV
2.5 GS/s
Enhanced bandwidth Without enhanced bandwidth
Step gain 0.5 GHz 0.5 GHz 0.025 GHz 0.02 GHz
500 m
V
15.0
mV
15.1
mV
14.0
mV
13.2
mV
200 mV 6.2 mV 6.35 mV 5.7 mV 5.4 mV
100 mV 3.35 mV 3.4 mV 2.95 mV 2.75 mV
50 m
V
1.5
6mV
1.6
mV
1.4
5mV
1.3
8mV
20 mV 0.63 mV 0.645 mV 0.58 mV 0.55 mV
10 mV 0.375 mV 0.34 mV 0.3 mV 0.277 mV
5m
V
0.
205 mV
0.
21 mV
0.
165 mV
0.
141 mV
2 mV 0.11 mV 0.13 mV 0.1 mV 0.062 mV
1 mV 0.09 mV 0.096 mV 0.097 mV 0.04 mV
Channel-to-channel crosstalk (channel isolation)
Input frequency range (up to the rated bandwidth). Assumes two
channels with the same scale and bandwidth settings
I
solation
0to10GHz
≥ 120:1
>10GHzto12GHz
≥ 80:1
>12GHzto15GHz
≥ 50:1
≥ 4 GHz models, typical
>15GHzto20GHz
≥ 25:1
< 4 GHz models, typical RMS voltage ratio of ≥ 100:1 at ≤ 100 MHz and ≥ 30:1 at > 100 MHz up to 2.5 GHz, and
≥20:1 above 2.5 GHz
Delay between channels, full
bandwidth, equivalent time, typical,
≥ 4 GHz models
≤ 100 ps between any two channels with the same scale and coupling settings.
≤ 50 ps delay change when enabling and disabling Channel Equalization (DSP matching).
Delay between channels, typical,
< 4 GHz models
≤ 100 ps between any two channels with the same scale and coupling settings with input
impedance set to 50Ω, DC coupling and scale set at or above 10 mV/div.
1–32 MSO70000/C, DSA70000B/C, DPO7000B/C, DPO7000, MSO5000, DPO5000 Series