Tektronix DPO70000C/DX Series User Manual

Bus setups Select the USB bus signal type
Select the USB bus signal type
NOTE. The USB bus Signal Type is available only on instruments with option SR-USB.
From the Bus Setup window, select Serial from the Bus Type list and then select the USB Serial bus type.
To use
To change the signal type for the displayed components of the bus, click Signal Type and select from
the cascad
ing list.
Behavio
r
The instrument acquires data from the channel you select for each compone nt.
What do you want to do next?
Learn more about b us setups. (see page 95)
Learn a bout bus configuration. (see page 148)
Learn about digital setups. (see page 87)
126 DSA/DPO70000D, MSO/DPO/DSA70000C, DPO7000C, and MSO/DPO5000 Series

Tektronix DPO70000C/DX Series Specifications

General

Brand	Tektronix
Model	DPO70000C/DX Series
Category	Test Equipment
Language	English